Linux version 2.4.22-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Fr Okt 3 20:36:25 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data) BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130912 zone(0): 4096 pages. zone(1): 126816 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. Kernel command line: ### isk_size=100000 init=/etc/init lang=de apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz ide_setup: hda=scsi ide_setup: hdb=scsi ide_setup: hdc=scsi ide_setup: hdd=scsi ide_setup: hde=scsi ide_setup: hdf=scsi ide_setup: hdg=scsi ide_setup: hdh=scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1495.183 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2981.88 BogoMIPS Memory: 514204k/523648k available (1262k kernel code, 9056k reserved, 534k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000 CPU: Common caps: a7e9fbbf 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 per-CPU timeslice cutoff: 0.00 usecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1495.2210 MHz. ..... host bus clock speed is 99.6814 MHz. cpu: 0, clocks: 996814, slice: 498407 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX [8086/24cc] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.2 PCI: Sharing IRQ 11 with 02:02.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe0000000, mapped to 0xe080d000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at c000:570c vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:00.2 PCI: Sharing IRQ 11 with 02:02.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHT2040AT, ATA DISK drive hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=5168/240/63 ide-cd: passing drive hdc to ide-scsi emulation. hdc: attached ide-scsi driver. Partition check: hda: hda1 hda2 ide: late registration of driver. Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.02 Guestimating sector 78139135 for superblock driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: 0202 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 478k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). NCR53c406a: no available ports found aec671x_detect: scsi: Detection failed (no card) GDT: Storage RAID Controller Driver. Version: 2.05 GDT: Found 0 PCI Storage RAID Controllers megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002) megaraid: no BIOS enabled. DC390: 0 adapters found Failed initialization of WD-7000 SCSI card! ISO 9660 Extensions: Microsoft Joliet Level 3 kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.00 cloop: /cdrom/KNOPPIX/KNOPPIX: 29879 blocks, 65536 bytes/block, largest block is 65562 bytes. cloop: loaded (max 8 devices) ISO 9660 Extensions: RRIP_1991A Freeing unused kernel memory: 132k freed Real Time Clock Driver v1.10e apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Sharing IRQ 11 with 02:01.0 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000086 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 20:50:29 Oct 3 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Sharing IRQ 11 with 02:00.0 PCI: Sharing IRQ 11 with 02:01.0 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.1 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:1d.2 PCI: Sharing IRQ 11 with 00:1f.1 PCI: Sharing IRQ 11 with 02:00.2 PCI: Sharing IRQ 11 with 02:02.0 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 parport0: PC-style at 0x3bc [PCSPP,TRISTATE] i810_rng hardware driver 0.9.8 loaded Intel(R) PRO/1000 Network Driver - version 5.1.13-k1 Copyright (c) 1999-2003 Intel Corporation. PCI: Found IRQ 11 for device 02:01.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Sharing IRQ 11 with 02:00.0 eth0: Intel(R) PRO/1000 Network Connection Intel 810 + AC97 Audio, version 0.24, 20:49:17 Oct 3 2003 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 11 i810: Intel ICH4 mmio at 0xe0c05c00 and 0xe0c07800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS116 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel(R) 855PM chipset agpgart: AGP aperture is 256M @ 0xd0000000 [drm] AGP 0.99 aperture @ 0xd0000000 256MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 02:00.0 PCI: Sharing IRQ 11 with 02:01.0 Journalled Block Device driver loaded e1000: eth0 NIC Link is Up 100 Mbps Full Duplex e1000: eth0 NIC Link is Up 100 Mbps Full Duplex